|
Fixed Frequency Licensed Solutions
 |
|
Market Applications
- Gas/Oil Production and Distribution
- Water, Gas and Electric Utilities
- Lotteries
- Traffic Control
- Industrial Process Control
- Railroad Communication Systems
|
|
MDS Transceiver Series Overview
The MDS 1710 Transceiver Series is a price/performance leading solution for licensed radio in the 130-174 MHz frequency range. MDS 1710 is available in the following VHF bands: 130-140 MHz, 140-150 MHz, 150-165 MHz, and 165-174 MHz. These radios provide increased throughput, and longer-range for multiple address systems. Transparent and direct asynchronous communication offers real-time communication. No extra software or programming is needed to implement communications using standard asynchronous protocols. A general purpose (unconditioned) digital output is available. The GE MDS Transceiver Series is field configurable as a master station or remote radio. They can operate as half-duplex or simplex radio. They support all splits in duplex frequencies. When operating as a master station, full network diagnostics are available. Simplex mode permits peer-to-peer radio communications.
Why Consider a GE MDS Transceiver Series Solution?
- High system performance and data integrity! Through robust construction, digital signal processing technology (DSP) and up to 19.2 kbps data throughput.
- Rapid Installation! Quick return on investment due to ease of wireless installation. This licensed radio offers the ability to communicate with any asynchronous protocol without extra software or extra programming.
- Performance under the most adverse conditions! Exceptional design provides excellent performance in the face of interference or difficult signal paths.
- Network Wide Diagnostics! InSite Network Management software simplifies maintenance tasks and reduces the cost of managing the network infrastructure. Provides a non-intrusive means of maintenance and link monitoring.
Features
- High Performance – Digital Signal Processing (DSP) Engine
- Flexibility – Single Unit Configurable as Master or Remote Radio
More Information
Specifications
MDS 1710A
- Frequency Band: 130 to 174 MHz
- Banding (MHz) : 130-140, 140-150, 150-165, 165-174
- Freq. Programmability: 5, 6.25 kHz increments, any MAS channel pair
- 4 Wire Analog
- Data Rate: 9600 bps (rf)
- Port Speed: 110 bps - 38,400 kbps (data)
- Channel Spacing: 12.5, 15 kHz
- Bit Error Rate: BER 1x10-6 @ -110 dBm typical
- Diagnostics: Network Wide Diagnostic Option
- Agency Approvals: FCC Part 90 (150-174 MHz bands)
- Available Now
- MDS 1710C
- Frequency Band: 130 to 174 MHz
- Banding (MHz): 130-140, 140-150, 150-165, 165-174
- Freq. Programmability: 5, 6.25 kHz increments, any MAS channel pair
- 4 Wire Analog
- Data Rate: 19,200 bps (rf)
- Port Speed: 110 bps - 38,400 kbps (data)
- Channel Spacing: 25, 30 kHz
- Bit Error Rate: BER 1x10-6 @ -105 dBm typical
- Diagnostics: Network Wide Diagnostic Option
- Agency Approvals: FCC Part 90 (150-174 MHz bands)
- Available Now
MDS 1710D*
- FCC Part 90
- ~5 KHz occupied bandwidth (6.25 KHz channels)
- 4 Wire Analog (limited bandwidth)
- 3,200 bps data @ -108 dBm typical
* Available pending FCC approval - currently under development
MDS 1710M**
- FCC Part 90
- ~7 KHz occupied bandwidth (12.5 KHz channels)
- 4 Wire Analog
- 9,600 bps data @ -103 dBm typical
** reduced deviation 9,600 bps transceiver
All Models
- Operational Modes: Async. - Simplex, half-duplex
- Data Interface: RS-232, DB-25 Female Connector
- Supports: TXD, RXD, RTS, CTS, DCD, RUS, AUX POWER, DSR, and GND
Transmitter
- Frequency Stability: +/- 0.00015% 1.5 ppm
- Carrier Power: 0.1 to 5 Watts Programmable
- Carrier Power Accuracy: Normal +/- 1.5 dB
- Duty Cycle: Continuous
- Output Impedance: 50 Ohms
Receiver
- Type: Double Conversion Superheterodyne
- Frequency Stability: +/- 0.00015% (1.5 ppm)
- Adjacent Channel (EIA): 60 dB nominal
Power Supplies
- Primary Power: Voltage 13.8 Vdc nominal (10.5 to 16 Vdc operating range)
- Tx Current: 2A Typical at 5 Watts
- Rx Current: <125 mA
- Sleep Mode: 15 mA nominal
Modem / Diagnostics
- Modulation: Digital / CPFSK
- CTS Delay: 0-255 msec programmable in 1 msec increments
- PTT Delay: 0-255 msec programmable in 1 msec increments
Physical
- Case: Rugged Die Cast Aluminum
- Dimensions: 5.08 H x 14.29 W x 18.4 D cm. (2.0 H x 5.625 W x 7.25 D in.)
- Weight: 1 kg. (2.2 lbs.)
Environmental
- Temperature Range: -30°C to +60°C (-22°F to +140°F)
- Humidity: 95% at 40°C (104°F) non-condensing
GE MDS products are manufactured under a quality system certified to ISO 9001. GE MDS reserves the right to make changes to specifications of products described in this data sheet at any time without notice and without obligation to notify any person of such changes.
|