|
Fixed Frequency Licensed Solutions
 |
|
Market Applications
- Gas/Oil Production and Distribution
- Water, Gas and Electric Utilities
- Lotteries
- Traffic Control
- Industrial Process Control
- Railroad Communication Systems
|
|
MDS Transceiver Series Overview
The GE MDS Transceiver Series is a price/performance leader in licensed microwave radios in the 330-512 MHz frequency range. They provide increased throughput, and longer range for multiple address systems. Transparent and direct asynchronous communication offers real-time communication. No extra software or programming is needed to implement communications using standard asynchronous protocols. A general purpose (unconditioned) digital output is available. The GE MDS Transceiver Series is field configurable as a master station or remote radio. They can operate as a half-duplex or simplex radio. They support all splits in duplex available. Simplex mode permits peer-to-peer radio communications. This product is available for use in Class 1, Division 2, Groups A, B, C & D hazardous locations.*
Why Consider a GE MDS Transceiver Series Solution?
High system performance and data integrity! Through robust construction, digital signal processing technology (DSP) and we offer up to 19.2 kbps data throughput. Rapid Installation! Quick return on investment due to ease of wireless installation. This licensed radio offers the ability to communicate with any asynchronous protocol without extra software or extra programming. Performance under the most adverse conditions! Exceptional design provides excellent performance in the face of interference or difficult signal paths. Network Wide Diagnostics! InSite Network Management software simplifies tasks and reduces the cost of managing the network infrastructure. Provides a non-intrusive means of maintenance and link monitoring.
Features
- High Performance – Digital Signal Processing (DSP) Engine
- Flexibility – Single Unit Configurable as Master or Remote Radio
- Compatibility – Inter-operable Versions Available for use with Existing MDS 2000, MDS 4000 Series Radios
More Information
Specifications
 |
|
| General |
| Frequency Bands: |
330 to 512 MHz |
|
| Freq. Programmability: |
6.25 kHz increments to any MAS channel pair |
| Model |
Agency Approval |
4 Wire Analog |
Data Rate |
Port Speed |
Bit Error Rate |
Diagnostics |
| 4710A |
FCC Part 90 Industry Canada & ENTELA |
Yes |
9600 bps (rf) |
110 bps-38.4 kbps (data) @ 12.5 kHz Channel Spacing |
BER 1x10-6 @ -110 dBm typical |
Network Wide Diagnostic Option |
| 4710B |
FCC |
Yes |
9600 bps (rf) |
300-9600 bps(rf and data) @ 12.5 kHz Channel Spacing |
4800 bps: BER 1x10-6 @ -110 dBm typical 9600 bps: BER 1x10-6 @ -108 dBm typical |
DTMF Diagnostic Option |
| 4710C |
|
Yes |
19,200 bps (rf) |
110 bps-38.4 kbps (data) @ 25 kHz Channel Spacing |
BER 1x10-6 @ -105 dBm typical |
Network Wide Diagnostic Option |
| 4710E |
ETSI: ETS 300 113 EMC: EN 300 279 CE Mark |
N/A |
4800 bps (rf) |
110 bps-38.4 kbps (data) @ 12.5 kHz Channel Spacing |
BER 1x10-6 @ -113 dBm typical |
Network Wide Diagnostic Option |
| 4710 |
UK MPT1411 (analog) |
Yes |
Analog |
N/A |
N/A |
N/A |
| 4710M |
MPT1411 (digital) |
Yes |
9600 bps (rf) |
110 bps-38.4 kbps (data) |
BER 1x10-6 @ -106 dBm typical |
Network Wide Diagnostic Option |
|
| For additional agency approval info visit www.microwavedata.com |
All Models |
|
| Operational Modes: |
Async. - Simplex, half-duplex, (synchronous available (9600 bps only) in MDS 4710B, and MDS 9710B) |
|
| Data Interface: |
RS-232, DB-25 Female Connector Supports: TXD, RXD, RTS, CTS, DCD, RUS, AUX POWER, DSR, and GND |
|
Transmitter |
| Frequency Stability: |
+/- 0.00015% 1.5 ppm |
|
| Carrier Power: |
0.1 to 5 Watts Programmable |
|
| Carrier Power Accuracy: |
Normal +/- 1.5 dB |
|
| Duty Cycle: |
Continuous |
|
| Output Impedance: |
50 Ohms |
|
Receiver |
| Type: |
Double Conversion Superheterodyne |
|
| Frequency Stability: |
+/- 0.00015% (1.5 ppm) |
|
| Adjacent Channel (EIA): |
60 dB nominal |
|
Power Supplies |
| Primary Power: |
Voltage 13.8 Vdc nominal (10.5 to 16 Vdc operating range) |
|
| Tx Current: |
2A Typical at 5 Watts |
|
| Rx Current: |
<125 mA |
|
| Sleep Mode: |
15 mA nominal |
|
Modem / Diagnostics |
| Modulation: |
Digital / CPFSK |
|
| CTS Delay: |
0-255 msec programmable in 1 msec increments |
|
| PTT Delay: |
0-255 msec programmable in 1 msec increments |
|
Physical |
| Case: |
Rugged Die Cast Aluminum |
|
| Dimensions: |
5.08 x 14.29 x 18.4 cm (2.0 x 5.625 x 7.25 inches) |
|
| Weight: |
1 kg (2.2 lbs) |
|
Environmental |
| Temperature Range: |
-30°C to +60°C (-22°F to +140°F) |
|
| Humidity: |
95% at 40°C (104°F) non-condensing |
|
Additional Agency Approval |
| FM/UL/CSA |
Approved* (consult factory for country specific approvals) |
|
Configuration Diagrams |
|
|
Typical MDS MAS Point-to-Multipoint Application
Typical GE MDS Point-to-Multipoint Application with Spread Spectrum Tail-End Link
|
* The transceiver is not acceptable as a stand-alone unit for use in the hazardous locations described above. It must either be mounted within another piece of equipment, which is certified for hazerdous locations, or installed within guidelines, or conditions of approval, as set forth by approving agencies.
GE MDS products are manufactured under a quality system certified to ISO 9001. GE MDS reserves the right to make changes to specifications of products described in this data sheet at any time without notice and without obligation to notify any person of such changes.
Copyright 2001 GE MDS Inc. (Part No. 2710/4710/9710) SL0091 Rev. H, 06-21-02
|
Products