Welcome, Guest Log In | About Us | Careers | Contact Us | MyMDS

MDS 9810

MDS x790 Product Photo  

Market Applications

  • SCADA Telemetry Systems
  • Multiple Address Communications
  • Gas/Oil Production and Distribution
  • Water, Gas and Electric Utilities
  • Lotteries
  • Traffic Control
  • Industrial Process Control
  • Railroad Communication Systems

 

MDS Master Station Series Product Overview

The GE MDS Redundant, Full-Duplex Master Station Series offers the ultimate in reliability and simplicity for ease of configuration and operation.

The GE MDS Master Station Series is the price/performance leader in licensed microwave radio in the 330-512 MHz frequency range. It gives increased throughput, longer-range alternatives for our customers’ Multiple Address Systems needs. Transparent and direct asynchronous communication offer real-time communication. No extra software or programming is needed to implement communications from standard asynchronous protocols.

The GE MDS Master Station Series may operate as a full duplex, half-duplex or simplex radio and is configurable as a redundant master station or remote radio. When operating as a master station it controls all network parameters of the remotes. The MDS 4790 and MDS 4710 remote transceivers together offer a new level of ease of integration and performance reliability for our customers’ data network systems.

Why Consider a GE MDS Master Station Series Solution?

High system performance and data integrity! Through robust construction and digital signal processing technology (DSP) we offer up to 19.2 kbps data throughput.

Reliability! For mission critical needs, system back-up capability is built-in.

Rapid Installation! Quick return on investment due to ease of wireless installation. This licensed radio offers the ability to communicate with any asynchronous protocol without extra software or extra programming.

Performance under the most adverse conditions! Exceptional design provides excellent performance in the face of interference or difficult signal paths. Will accept external bypass high performance duplexers or receive filters.

Network Wide Diagnostics! InSite Network Management software simplifies tasks and reduces the cost of managing the network infrastructure. Provides a non-intrusive means of maintenance and link monitoring.

Features

  • Digital Signal Processing (DSP) Engine
  • Software Configurable Modems
  • Modular Design with Swappable Power Supply

More Information


Specifications

General
Supports: TXD, RXD, RTS, CTS, DCD, RUS, AUX POWER, DSR, and GND
Frequency Range: 330 to 512 MHz
Tx / Rx Split: Simplex to 132 MHz
Data Interface: RS-232, DB-25 Female Connector
Freq. Programmability: 6.25 kHz increments to any MAS channel pair
Operational Modes: Async. - Simplex, half-duplex, full-duplex (synchronous available in MDS 4790B, and MDS 9790B)

MDS 4790A MDS 4790E
Agency Approvals FCC Part 90
Industry Canada & CE Mark
ETSI: ETS 300 113
EMC: EN 300 279
CE Mark


Transmitter
Carrier Power: 0.1 to 5 Watts Programmable
Duty Cycle: Continuous
Output Impedance: 50 Ohms
Frequency Stability: +/- 0.00015% (1.5 ppm)
Carrier Power Accuracy: Normal +/- 1.5 dB


Receiver
Type: Double Conversion Superheterodyne
Frequency Stability: +/- 0.00015% (1.5 ppm)
Adjacent Channel (EIA): 60 dB nominal


Power
Primary Power: 100-240 Vac (50/60 Hz)
24/48 Vdc (21 to 60 Vdc)
125 Vdc external
12 Vdc external
Power Required: < 60 Watts nominal


Modem
Modulation: Digital / CPFSK
Latency (Rx-Tx-Rx): 10 ms including RTS/CTS delay
CTS Delay: 0-255 msec programmable in 1 msec increments
PTT Delay: 0-255 msec programmable in 1 msec increments
Data Rate (data): 110 bps - 38.4 kbps

MDS 4790A MDS 4790C MDS 4790E
Bit Error Rate Sensitivity 9600 bps: BER 1x10 -6
@-110 dBm typical
19.2 kbps BER 1x10 -6
@-105 dBm typical
4800 bps: BER 1x10 -6
@-114 dBm typical
Data Rate (rf) 9600 bps 19,200 bps 4800 bps


Environmental
Temperature Range: -30°C to +60°C (-22°F to +140°F) at 95% humidity (non-condensing)


Physical
Front Panel: Detachable for convenient location of Keypad/LCD panel
Rack Mount: Flush or 5 inch offset
Dimensions: 9 cm (3.5 in) x 48 cm (19 in) (2U)
Weight: 9 kg (19.8 lbs)


Diagnostics
Local Diagnostics: Included in all models
Network-wide Diagnostics: Optional InSite™ Radio System Management software


Configuration Diagrams

Typical MDS 9810 Peer-to-Peer Application

Typical MDS 9810 Point-To-Multipoint Repeated Application

Typical GE MDS Point-to-Multipoint Application with Spread Spectrum Tail-End Link


GE MDS products are manufactured under a quality system certified to ISO 9001. GE MDS reserves the right to make changes to specifications of products described in this data sheet at any time without notice and without obligation to notify any person of such changes.

Copyright 2001 GE MDS Inc. (MDS iNET SL0093) Rev J, 06-21-02