Welcome, Guest Log In | About Us | Careers | Contact Us | MyMDS

MDS entraNET 2400

Entranet photo  

Market Applications

  • Wireless Ethernet
  • Gateway for serial/legacy networks and/or devices to IP network
  • Mobile network access for vehicle based operation

Preliminary

Introducing MDS entraNET 2400™

The MDS entraNET 2400™ is a long-range, solar friendly, secure wireless IP/Ethernet solution. It allows customers to bring business information over Ethernet or a serial gateway and onto IP based networks. This includes mission-critical, revenue-generating data from fixed locations such as compressor stations, pipelines, fluid storage tanks and utility meters. It also enables mobile network access for vehicle based operation.

Each MDS entraNET 2400 cell is made up of one access point and multiple remotes (Serial or Ethernet):

Access Point, provides both serial and Ethernet connectivity.
Serial Remote, provides one serial port with protocol encapsulation over IP.
Ethernet Remote, provides ethernet connectivity to a single remote device.

MDS entraNET 2400 uses advanced 2400 MHz FHSS technology for license-free operation in the 2401.6-2477.8 MHz band. It is capable of up to 15 mile range1 and up to 106 kbps over-the-air data rate communications.

Why use an MDS entraNET 2400 Wireless Network Solution?

Longest range industrial product in its class. Providing lowest cost of ownership.

Secure wireless operation with multiple layers of protection, including 2400 MHz FHSS physical layer, 128-bit data encryption, two-way authentication and dynamic key rotation.2

Flexible. The MDS entraNET 2400 supports multiple users connecting to multiple applications via multiple protocols on the same MDS entraNET 2400™ cell - simultaneously!

Future proof. The entraNET 2400 adheres to open industry standards to interface with external devices, enabling newer and older technologies to communicate.

MDS NETview MS™ Network Management System2 is based on a platform independent Java application. It is application independent with a centralized SNMP server and integrates with multiple vendor platforms.

Features

  • Multiple Applications – Combines serial and Ethernet remotes on one network allowing migration of existing serial devices to IP
  • Industrial Grade Performance – Extended temperature range for extreme environments
  • Low Power Consumption – Solar panel friendly
  • Long Range – Up to 15 miles1
  • Fast – Up to 106 Kbps data rate over the air
  • Secure – Multiple security levels prevent eavesdropping and unauthorized network access
  • License free – Deploy immediately
  • Plug and Play Connectivity – configuration requires virtually no setup
  • SNMP Management2 – Advanced remote diagnostics with MDS NETview MS™

More Information


Specifications

General | Radio | Interfaces | Environmental | Physical | Network Management | Agency Approvals | Typical Configurations | Protocols | Footnotes
General
Data Rate: Up to 106 Kbps over-the-air
Frequency Bands: 2.4016-2.4778 GHz ISM band
Spreading Mode: Frequency Hopping Spread Spectrum
Frequency Channels: Selectable 64 to 128 in increments of 16
Range2:
Typical Fixed Range: 6 miles
Maximum Fixed Range: 15 miles
Typical Mobile Range (parked): 2.5 miles
Typical Mobile Range (moving): 1 miles


Radio
System Gain: 131 dB
Carrier Power: 0.01 to 0.1 watts (10 to 20 dBm)
Output Impedence: 50 Ohms
Occupied Bandwidth: 200 kHz
Modulation: 2 level CPFSK (Continuous Phase FSK)
Receiver Sensitivity: -104 dBm (1 x 10-6 BER) typical


Physical Interface
Ethernet: 10BaseT, RJ-45
Serial: RS-232/V.24, RJ-45, DCE
1,200-115,200 bps
Antenna: TNC connector (female)
LEDs: ETH, Com1, Com2, Power, Link


Protocols
Wireless: CSMA/CA with Collision Avoidance
Ethernet: IEEE 802.3 (single device at remote)
IP (DHCP,ICMP,UDP,TCP,ARP)
Serial: Encapsulation over IP (tunneling) for serial async multidrop protocols including Modbus, DNP.3, DF1, BSAP.


Management
HTTP (embedded web server)2, TELNET, Local Console
SNMPv1/2/3, MIB II, Enterprise MIB2
SYSLOG2
MDS NETview MS™ 2


Environmental
Temperature: -20°C to +60°C (-4°F to +140°F)
Humidity: 95% at 40°C (104°F) non-condensing
Input Power: 6-30 Vdc (13.8 Vdc nominal)
Current Consumption:

Access Point

Mode 30 Vdc 13.8 Vdc 6 Vdc
Transmit 253.3 mA 488.5 mA 1091.7 mA
Receive 119.7 mA 230.1 mA 533.3 mA

Remotes

Mode 30 Vdc 13.8 Vdc 6 Vdc
Transmit 223.3 mA 433.8 mA 941.7 mA
Receive 69.7 mA 130.1 mA 283.3 mA
Sleep 8 mA 15 mA* 130 mA
Shutdown 0.78 mA 0.55 mA* 0.37 mA
* Sleep and Shutdown measurements conducted @ 12 Vdc


Mechanical
Case: Die Cast Aluminum
Mounting Options: Flat surface mount brackets, DIN rail
Access Point
Dimensions: 3.15 H x 17.2 W x 11.2 D cm
(1.25 H x 6.75 W x 4.5 D in.)
Weight: 635 g (1.4 lb.)
Remote
Dimensions: 2.5 H x 12.7 W x 8.9 D cm
(1 H x 5 W x 3.5 D in.)
Weight: 472 g (1.04 lb.)


Agency Approvals
FCC Part 15.247 Approved
IC approved
ETSI Approved
CE Mark


Typical Configurations
Typical Configuration:




Footnotes
1 Typical fixed range calculation assumes a 6 dBd gain Omni on a 100 ft.tower at the AP, a 10 dBd gain Yagi on a 25 ft. mast at the remote with output power decreased to yield maximum allowable EIRP (36 dBm), a 10 dB fade margin, and a mix of agricultural and commercial terrain with line of sight.

Typical mobile range calculation assumes a 6 dBd gain Omni on a 100 ft.tower at the AP, a 5 dBd gain Omni with 1 watt output power at 6 ft. height, a 10 dB fade margin, and 90% reliability with near line-of-sight in a mix of cultural and commercial terrain.

Maximum range achieved with a clear line-of-sight path, and fresnel zone clearance.

Actual performance is dependent on many factors including antenna height, blocked paths and terrain.

2 Available in a future release,consult factory for details.

GE MDS products are manufactured under a quality system certified to ISO 9001. GE MDS reserves the right to make changes to specifications of products described in this data sheet at any time without notice and without obligation to notify any person of such changes.

(MDS entraNET 2400 SL0110) Preliminary Rev. C, 07-30-04